Roofing contractors in Brunswick, ME

Brunswick sits at the northern edge of the Portland labor market, and pricing reflects it — close to the Maine average rather than the Portland premium. Contractors here often serve the Bath and Topsham corridor as well, so travel time is priced into smaller jobs.

Our Haus isn't a contractor directory. We give you the local cost math, the permit reality, and the paperwork tools — the scope, the proposal comparison, and the vault your records live in.

Check a quote against Brunswick pricing Write a scope first

Roof replacement cost in Brunswick

Based on a 1,600 sq ft roof replacement scope, adjusted by the Maine regional cost index and a Brunswick metro multiplier of 0.99×. A 10% contingency reserve is included. These are budgeting estimates, not quotes.

Source: Our Haus cost engine — per-square-foot bands from public industry data (Cost vs. Value, NAHB, RSMeans-derived regional indices), adjusted for Maine and the Brunswick metro.
Brunswick roof replacement	Low	Likely	High
Basic finishEntry-level materials, no layout change	$42k	$75k	$117k
Mid-range finishThe most common scope	$75k	$125k	$200k
High-end finishCustom materials and detail	$200k	$300k	$458k

Source: Our Haus cost engine — per-square-foot bands from public industry data (Cost vs. Value, NAHB, RSMeans-derived regional indices), adjusted for Maine and the Brunswick metro.

Estimated range — based on BLS OEWS national average wages and BLS PPI material indexes applied to Our Haus baseline unit costs, as of June 2026. Estimates are shown as a range and help set expectations. They are not a quote, a verified price, or an appraisal of what a contractor will charge.

Where the money goes (mid-range finish)

Line item
Line item	Low	Likely	High
Decking / paving materials	$22k	$36k	$58k
Structural framing	$12k	$20k	$33k
Railings & stairs	$6.8k	$11k	$18k
Footings	$6.8k	$11k	$18k
Labor	$18k	$30k	$47k
Permits	$2.7k	$4.5k	$7.3k

What drives the price in Brunswick

Federal and Greek Revival homes on and near Federal Street and Park Row, mill-era housing near the Androscoggin, mid-century neighborhoods around the former naval air station, and newer building at Brunswick Landing. The historic stock is genuinely old — expect plaster, original framing, and lead paint.

Ice-and-water coverage: New England code and good practice call for ice-and-water shield well past the interior wall line at the eaves. Some bids cover the first course only. That difference is invisible on a quote total and very visible in February.
Pitch and stories: Steep pitches over 8:12 need staging and fall protection, and a three-story house adds setup time. Both raise labor materially.
Layers to remove: Two or three existing layers mean more tear-off labor and more disposal weight. Ask whether the bid assumes one layer and what happens if there are two.
Deck condition: Sheathing replacement should be a per-sheet unit price in the contract, not a surprise. Older plank decking sometimes needs full re-sheathing.
Ventilation: Ridge vent plus adequate soffit intake is what keeps the roof deck cold and prevents ice dams. A bid that adds a ridge vent without confirming intake is not solving the problem.

Common Brunswick neighborhoods where this work comes up: Federal Street Historic District, Brunswick Landing, Maine Street, Pleasant Hill, Mere Point.

Permits and rules in Brunswick

Authority: Town of Brunswick Codes Enforcement Department

Building permit plus zoning review; trades pull electrical and plumbing separately. Exterior work in the Federal Street and Park Row historic districts goes through additional review. Shoreland zoning applies along the Androscoggin and out toward Mere Point and Simpsons Point.

Maine contract and licensing rules

Maine requires a written contract for home-construction or repair work over $3,000. The contract must include the contractor's name and address, the work and materials, the total price, a payment schedule, start and completion dates, a warranty statement, and notice of the state's contractor-dispute mediation program. Maine does not license general contractors, so verify insurance directly with the carrier.

Timeline and season in Brunswick

April through November for exterior work, with the spring queue filling early. Winters here are slightly harder than on the immediate coast, so weather protection for open framing is a real budget line.

Typical duration: 1–4 days on site for a typical single-family.

1
Inspection and quote · 1 week
Measurement, deck assessment, and a written scope. Insurance claims add an adjuster visit.
2
Permit · Days
Most municipalities require a roofing permit for a full strip-and-replace.
3
Material delivery and staging · 1 day
Shingles are loaded onto the roof or staged in the driveway; site protection goes down.
4
Tear-off and deck repair · 1 day
Old roofing comes off in sections so nothing is left open overnight. Bad sheathing is replaced.
5
Dry-in and install · 1–3 days
Ice-and-water, underlayment, drip edge, flashing, shingles, ridge.
6
Cleanup and final · Same day
Magnetic sweep for nails, debris removal, and a final walk with photos of flashing details.

What's included — and what usually isn't

A roof replacement in New England is as much about ice and water management as it is about shingles. The shingle line item is the easy part to compare between bids; the underlayment, ice-and-water coverage, flashing, and ventilation details are where bids actually differ.

Typically included

• Tear-off and disposal of existing roofing layers
• Deck inspection and replacement of damaged sheathing (usually a unit price)
• Ice-and-water shield at eaves, valleys, and penetrations
• Synthetic underlayment across the field
• Drip edge, step flashing, and counter-flashing at walls and chimneys
• Shingles, ridge cap, and ridge or static ventilation
• Pipe boots and any skylight flashing kits
• Site protection, magnetic nail sweep, and cleanup

Usually excluded

• Chimney masonry repair or rebuilds
• Gutter replacement, unless separately listed
• Structural repair to rafters found under a rotted deck
• Interior ceiling repair from prior leaks

What a complete Brunswick estimate spells out

• Total roof area in squares and the number of existing layers assumed
• Shingle manufacturer, product line, and warranty type (material vs. system)
• How far ice-and-water shield extends at eaves and valleys, in feet or courses
• A per-sheet unit price for sheathing replacement
• Flashing approach at chimneys and walls — new step flashing or reuse
• Ventilation plan, including soffit intake
• Proof of workers' compensation coverage for a crew working at height

Full checklist: what should be in a contractor's estimate.

Looking for a roof replacement contractor in Brunswick?

We don't keep a contractor directory, and we won't pretend to. The dependable process is to gather two or three referrals locally, check the Maine registration or license rules above, confirm general liability and workers' compensation directly with each carrier, then compare the written proposals side by side against the ranges on this page.

Run a Brunswick contractor's business? You can publish a free Our Haus profile with your license, insurance dates, service area, and work photos, and share it by link or QR code.

Publish a contractor profile How to vet a contractor

Have a Brunswick quote in hand?

Run it through the quote range checker. We compare it against the Maine cost index, flag line items that look high, and review the contract against Maine home-improvement rules.

Check my quote

Roof replacement in Brunswick — common questions

How do I compare two roofing bids that are thousands apart?

Compare the underlayment and flashing lines, not the shingle brand. Ice-and-water coverage, whether step flashing is new or reused, the sheathing unit price, and the ventilation plan explain most of the spread.

Can a roof be replaced in winter here?

It can be done when a roof is failing, but asphalt shingles need warm surfaces to seal. Cold-weather installs generally require hand-sealing tabs and cost more. Schedule April through November when you have the choice.