Siding contractors in Brunswick, ME
Brunswick sits at the northern edge of the Portland labor market, and pricing reflects it — close to the Maine average rather than the Portland premium. Contractors here often serve the Bath and Topsham corridor as well, so travel time is priced into smaller jobs.
Our Haus isn't a contractor directory. We give you the local cost math, the permit reality, and the paperwork tools — the scope, the proposal comparison, and the vault your records live in.
Siding replacement cost in Brunswick
Based on a 1,800 sq ft siding replacement scope, adjusted by the Maine regional cost index and a Brunswick metro multiplier of 0.99×. A 10% contingency reserve is included. These are budgeting estimates, not quotes.
| Brunswick siding replacement | Low | Likely | High |
|---|---|---|---|
| Basic finishEntry-level materials, no layout change | $42k | $75k | $117k |
| Mid-range finishThe most common scope | $75k | $125k | $200k |
| High-end finishCustom materials and detail | $200k | $300k | $458k |
Source: Our Haus cost engine — per-square-foot bands from public industry data (Cost vs. Value, NAHB, RSMeans-derived regional indices), adjusted for Maine and the Brunswick metro.
Estimated range — based on BLS OEWS national average wages and BLS PPI material indexes applied to Our Haus baseline unit costs, as of June 2026. Estimates are shown as a range and help set expectations. They are not a quote, a verified price, or an appraisal of what a contractor will charge.
Where the money goes (mid-range finish)
| Line item | Low | Likely | High |
|---|---|---|---|
| Decking / paving materials | $22k | $36k | $58k |
| Structural framing | $12k | $20k | $33k |
| Railings & stairs | $6.8k | $11k | $18k |
| Footings | $6.8k | $11k | $18k |
| Labor | $18k | $30k | $47k |
| Permits | $2.7k | $4.5k | $7.3k |
Estimated range — based on BLS OEWS national average wages and BLS PPI material indexes applied to Our Haus baseline unit costs, as of June 2026. Estimates are shown as a range and help set expectations. They are not a quote, a verified price, or an appraisal of what a contractor will charge.
What drives the price in Brunswick
Federal and Greek Revival homes on and near Federal Street and Park Row, mill-era housing near the Androscoggin, mid-century neighborhoods around the former naval air station, and newer building at Brunswick Landing. The historic stock is genuinely old — expect plaster, original framing, and lead paint.
- What is underneath
- Strip-off jobs reveal sheathing condition. On pre-1960 homes, plan a repair allowance; a bid with no unit price for sheathing replacement is pricing luck.
- Product class
- Vinyl, fiber cement, engineered wood, and cedar each carry different installed costs and maintenance profiles. Fiber cement's installed price includes the cutting and handling labor that makes it slower to hang.
- Window and trim integration
- New siding against old windows is where leaks come from. Whether the bid includes new flashing tapes and integrated trim, or just butts siding to existing trim, is a major quality and price divider.
- Stories and access
- Three-story work needs staging or a lift, and tight lot lines slow everything. Access is a real cost line on dense New England lots.
Common Brunswick neighborhoods where this work comes up: Federal Street Historic District, Brunswick Landing, Maine Street, Pleasant Hill, Mere Point.
Permits and rules in Brunswick
Authority: Town of Brunswick Codes Enforcement Department
Building permit plus zoning review; trades pull electrical and plumbing separately. Exterior work in the Federal Street and Park Row historic districts goes through additional review. Shoreland zoning applies along the Androscoggin and out toward Mere Point and Simpsons Point.
Maine contract and licensing rules
Maine requires a written contract for home-construction or repair work over $3,000. The contract must include the contractor's name and address, the work and materials, the total price, a payment schedule, start and completion dates, a warranty statement, and notice of the state's contractor-dispute mediation program. Maine does not license general contractors, so verify insurance directly with the carrier.
Timeline and season in Brunswick
April through November for exterior work, with the spring queue filling early. Winters here are slightly harder than on the immediate coast, so weather protection for open framing is a real budget line.
Typical duration: 1–3 weeks on site for a typical single-family.
- 1Measurement and quote · 1 week
Wall area, openings, and a teardown assessment of the existing cladding layers.
- 2Material order · 1–6 weeks
Fiber cement and special-order colors carry lead times; confirm before teardown.
- 3Strip and repair · 2–5 days
Old siding off, sheathing inspected, repairs at the stated unit price.
- 4Weather barrier and flashing · 1–3 days
The phase that decides whether the job lasts. Housewrap, tapes, pan flashing at openings.
- 5Siding and trim · 1–3 weeks
Product installation with proper clearances at roofs, decks, and grade.
What's included — and what usually isn't
Siding is a weather-barrier job wearing a cosmetic costume. The product line on the bid matters less than the flashing, housewrap, and window-integration details underneath — and those are exactly the lines that disappear from the cheapest quote.
Typically included
- • Removal and disposal of existing siding where specified
- • Inspection of sheathing and repair at a stated unit price
- • Housewrap or integrated weather barrier, taped and detailed
- • Flashing at windows, doors, roofs, and penetrations
- • New siding in the specified product, with trim and corners
- • Site protection and daily cleanup
Usually excluded
- • Rotted sheathing or framing repair beyond a stated allowance
- • Window replacement, even where the work exposes window problems
- • Painting, when the product is unfinished
- • Gutter removal and reinstallation, unless listed
What a complete Brunswick estimate spells out
- • Whether existing siding is stripped or covered — and if covered, why that is acceptable
- • Weather-barrier product by name and how openings are flashed
- • A per-sheet or per-square-foot unit price for sheathing repair
- • Siding manufacturer, product line, and warranty type
- • How the work integrates with existing windows and trim
Full checklist: what should be in a contractor's estimate.
Looking for a siding replacement contractor in Brunswick?
We don't keep a contractor directory, and we won't pretend to. The dependable process is to gather two or three referrals locally, check the Maine registration or license rules above, confirm general liability and workers' compensation directly with each carrier, then compare the written proposals side by side against the ranges on this page.
Run a Brunswick contractor's business? You can publish a free Our Haus profile with your license, insurance dates, service area, and work photos, and share it by link or QR code.
Have a Brunswick quote in hand?
Run it through the quote range checker. We compare it against the Maine cost index, flag line items that look high, and review the contract against Maine home-improvement rules.
Check my quoteSiding replacement in Brunswick — common questions
Can new siding go over the old siding?
Sometimes — over one sound layer of flat siding, with the right preparation, it is legal and can be reasonable. Over multiple layers, over rot, or where window flanges need re-flashing, strip it. Any honest answer requires looking at what is on the house now.
How long does new siding last in this climate?
Quality vinyl and fiber cement are routinely rated for decades, and both handle freeze-thaw well when the weather barrier underneath is detailed correctly. Cedar performs beautifully but wants a maintenance cycle. The failure mode in New England is almost never the product — it is the flashing.