Siding contractors in Gorham, ME

Gorham is one of the better value markets in Greater Portland. It is inside the commuting radius for Portland crews, lots are open and easy to work on, and site logistics rarely add cost the way peninsula jobs do.

Our Haus isn't a contractor directory. We give you the local cost math, the permit reality, and the paperwork tools — the scope, the proposal comparison, and the vault your records live in.

Siding replacement cost in Gorham

Based on a 1,800 sq ft siding replacement scope, adjusted by the Maine regional cost index and a Gorham metro multiplier of 0.99×. A 10% contingency reserve is included. These are budgeting estimates, not quotes.

Source: Our Haus cost engine — per-square-foot bands from public industry data (Cost vs. Value, NAHB, RSMeans-derived regional indices), adjusted for Maine and the Gorham metro.
Gorham siding replacementLowLikelyHigh
Basic finishEntry-level materials, no layout change$42k$75k$117k
Mid-range finishThe most common scope$75k$125k$200k
High-end finishCustom materials and detail$200k$300k$458k

Source: Our Haus cost engine — per-square-foot bands from public industry data (Cost vs. Value, NAHB, RSMeans-derived regional indices), adjusted for Maine and the Gorham metro.

Estimated range — based on BLS OEWS national average wages and BLS PPI material indexes applied to Our Haus baseline unit costs, as of June 2026. Estimates are shown as a range and help set expectations. They are not a quote, a verified price, or an appraisal of what a contractor will charge.

Where the money goes (mid-range finish)

Line item
Line itemLowLikelyHigh
Decking / paving materials$22k$36k$58k
Structural framing$12k$20k$33k
Railings & stairs$6.8k$11k$18k
Footings$6.8k$11k$18k
Labor$18k$30k$47k
Permits$2.7k$4.5k$7.3k

Estimated range — based on BLS OEWS national average wages and BLS PPI material indexes applied to Our Haus baseline unit costs, as of June 2026. Estimates are shown as a range and help set expectations. They are not a quote, a verified price, or an appraisal of what a contractor will charge.

What drives the price in Gorham

Farmhouses and capes in the village and along the older road frontages, large 1990s–2010s subdivisions toward South Gorham and Little Falls, and student-adjacent rentals near the university. The subdivision stock is now old enough to be hitting first-generation roof, siding, and kitchen replacement.

What is underneath
Strip-off jobs reveal sheathing condition. On pre-1960 homes, plan a repair allowance; a bid with no unit price for sheathing replacement is pricing luck.
Product class
Vinyl, fiber cement, engineered wood, and cedar each carry different installed costs and maintenance profiles. Fiber cement's installed price includes the cutting and handling labor that makes it slower to hang.
Window and trim integration
New siding against old windows is where leaks come from. Whether the bid includes new flashing tapes and integrated trim, or just butts siding to existing trim, is a major quality and price divider.
Stories and access
Three-story work needs staging or a lift, and tight lot lines slow everything. Access is a real cost line on dense New England lots.

Common Gorham neighborhoods where this work comes up: Gorham Village, South Gorham, Little Falls, White Rock, North Gorham.

Permits and rules in Gorham

Authority: Town of Gorham Code Enforcement Office

Building permit for additions, structural work, and decks, with zoning review on setbacks. Many properties are on private well and septic, so bedroom-count changes require septic capacity sign-off. Shoreland zoning applies along the Presumpscot and at Little Sebago.

Maine contract and licensing rules

Maine requires a written contract for home-construction or repair work over $3,000. The contract must include the contractor's name and address, the work and materials, the total price, a payment schedule, start and completion dates, a warranty statement, and notice of the state's contractor-dispute mediation program. Maine does not license general contractors, so verify insurance directly with the carrier.

Timeline and season in Gorham

Exterior work runs April through November. Inland Gorham freezes a little earlier than the coast, so excavation and foundation work should be scheduled with October in mind.

Typical duration: 1–3 weeks on site for a typical single-family.

  1. 1
    Measurement and quote · 1 week

    Wall area, openings, and a teardown assessment of the existing cladding layers.

  2. 2
    Material order · 1–6 weeks

    Fiber cement and special-order colors carry lead times; confirm before teardown.

  3. 3
    Strip and repair · 2–5 days

    Old siding off, sheathing inspected, repairs at the stated unit price.

  4. 4
    Weather barrier and flashing · 1–3 days

    The phase that decides whether the job lasts. Housewrap, tapes, pan flashing at openings.

  5. 5
    Siding and trim · 1–3 weeks

    Product installation with proper clearances at roofs, decks, and grade.

What's included — and what usually isn't

Siding is a weather-barrier job wearing a cosmetic costume. The product line on the bid matters less than the flashing, housewrap, and window-integration details underneath — and those are exactly the lines that disappear from the cheapest quote.

Typically included

  • Removal and disposal of existing siding where specified
  • Inspection of sheathing and repair at a stated unit price
  • Housewrap or integrated weather barrier, taped and detailed
  • Flashing at windows, doors, roofs, and penetrations
  • New siding in the specified product, with trim and corners
  • Site protection and daily cleanup

Usually excluded

  • Rotted sheathing or framing repair beyond a stated allowance
  • Window replacement, even where the work exposes window problems
  • Painting, when the product is unfinished
  • Gutter removal and reinstallation, unless listed

What a complete Gorham estimate spells out

  • Whether existing siding is stripped or covered — and if covered, why that is acceptable
  • Weather-barrier product by name and how openings are flashed
  • A per-sheet or per-square-foot unit price for sheathing repair
  • Siding manufacturer, product line, and warranty type
  • How the work integrates with existing windows and trim

Full checklist: what should be in a contractor's estimate.

Looking for a siding replacement contractor in Gorham?

We don't keep a contractor directory, and we won't pretend to. The dependable process is to gather two or three referrals locally, check the Maine registration or license rules above, confirm general liability and workers' compensation directly with each carrier, then compare the written proposals side by side against the ranges on this page.

Run a Gorham contractor's business? You can publish a free Our Haus profile with your license, insurance dates, service area, and work photos, and share it by link or QR code.

Have a Gorham quote in hand?

Run it through the quote range checker. We compare it against the Maine cost index, flag line items that look high, and review the contract against Maine home-improvement rules.

Check my quote

Siding replacement in Gorham — common questions

Can new siding go over the old siding?

Sometimes — over one sound layer of flat siding, with the right preparation, it is legal and can be reasonable. Over multiple layers, over rot, or where window flanges need re-flashing, strip it. Any honest answer requires looking at what is on the house now.

How long does new siding last in this climate?

Quality vinyl and fiber cement are routinely rated for decades, and both handle freeze-thaw well when the weather barrier underneath is detailed correctly. Cedar performs beautifully but wants a maintenance cycle. The failure mode in New England is almost never the product — it is the flashing.

Keep reading