Siding contractors in Scarborough, ME

Scarborough is the fastest-growing town in Greater Portland, and that demand shows up in contractor availability more than in hourly rates. Crews are booked deep, so the practical cost of waiting — or of paying for an off-season start — is often the real variable here.

Our Haus isn't a contractor directory. We give you the local cost math, the permit reality, and the paperwork tools — the scope, the proposal comparison, and the vault your records live in.

Siding replacement cost in Scarborough

Based on a 1,800 sq ft siding replacement scope, adjusted by the Maine regional cost index and a Scarborough metro multiplier of 1.04×. A 10% contingency reserve is included. These are budgeting estimates, not quotes.

Source: Our Haus cost engine — per-square-foot bands from public industry data (Cost vs. Value, NAHB, RSMeans-derived regional indices), adjusted for Maine and the Scarborough metro.
Scarborough siding replacementLowLikelyHigh
Basic finishEntry-level materials, no layout change$44k$79k$123k
Mid-range finishThe most common scope$79k$131k$210k
High-end finishCustom materials and detail$210k$315k$481k

Source: Our Haus cost engine — per-square-foot bands from public industry data (Cost vs. Value, NAHB, RSMeans-derived regional indices), adjusted for Maine and the Scarborough metro.

Estimated range — based on BLS OEWS national average wages and BLS PPI material indexes applied to Our Haus baseline unit costs, as of June 2026. Estimates are shown as a range and help set expectations. They are not a quote, a verified price, or an appraisal of what a contractor will charge.

Where the money goes (mid-range finish)

Line item
Line itemLowLikelyHigh
Decking / paving materials$23k$38k$61k
Structural framing$13k$21k$34k
Railings & stairs$7.2k$12k$19k
Footings$7.2k$12k$19k
Labor$19k$31k$50k
Permits$2.9k$4.8k$7.6k

Estimated range — based on BLS OEWS national average wages and BLS PPI material indexes applied to Our Haus baseline unit costs, as of June 2026. Estimates are shown as a range and help set expectations. They are not a quote, a verified price, or an appraisal of what a contractor will charge.

What drives the price in Scarborough

A wide spread: 1960s–1990s subdivisions inland, older farmhouse and cottage stock in Dunstan and Oak Hill, and coastal homes at Higgins Beach, Pine Point, and Prouts Neck that sit in flood and shoreland zones. Beach-area properties carry elevation, flood-vent, and salt-exposure requirements that inland quotes never include.

What is underneath
Strip-off jobs reveal sheathing condition. On pre-1960 homes, plan a repair allowance; a bid with no unit price for sheathing replacement is pricing luck.
Product class
Vinyl, fiber cement, engineered wood, and cedar each carry different installed costs and maintenance profiles. Fiber cement's installed price includes the cutting and handling labor that makes it slower to hang.
Window and trim integration
New siding against old windows is where leaks come from. Whether the bid includes new flashing tapes and integrated trim, or just butts siding to existing trim, is a major quality and price divider.
Stories and access
Three-story work needs staging or a lift, and tight lot lines slow everything. Access is a real cost line on dense New England lots.

Common Scarborough neighborhoods where this work comes up: Oak Hill, Pine Point, Higgins Beach, Dunstan, Prouts Neck, Eight Corners.

Permits and rules in Scarborough

Authority: Town of Scarborough Building Inspections and Code Enforcement

Additions and structural work need a building permit plus zoning review. Coastal and marsh-adjacent parcels — a large share of the town — fall under shoreland zoning and FEMA flood-zone rules, which can dictate elevation and construction method, not just approval. Confirm the flood zone before design.

Maine contract and licensing rules

Maine requires a written contract for home-construction or repair work over $3,000. The contract must include the contractor's name and address, the work and materials, the total price, a payment schedule, start and completion dates, a warranty statement, and notice of the state's contractor-dispute mediation program. Maine does not license general contractors, so verify insurance directly with the carrier.

Timeline and season in Scarborough

Coastal exterior work concentrates from late April through October. Summer traffic and beach-season parking around Pine Point and Higgins Beach genuinely slow deliveries and crew access, which is why some contractors price shoulder-season work lower.

Typical duration: 1–3 weeks on site for a typical single-family.

  1. 1
    Measurement and quote · 1 week

    Wall area, openings, and a teardown assessment of the existing cladding layers.

  2. 2
    Material order · 1–6 weeks

    Fiber cement and special-order colors carry lead times; confirm before teardown.

  3. 3
    Strip and repair · 2–5 days

    Old siding off, sheathing inspected, repairs at the stated unit price.

  4. 4
    Weather barrier and flashing · 1–3 days

    The phase that decides whether the job lasts. Housewrap, tapes, pan flashing at openings.

  5. 5
    Siding and trim · 1–3 weeks

    Product installation with proper clearances at roofs, decks, and grade.

What's included — and what usually isn't

Siding is a weather-barrier job wearing a cosmetic costume. The product line on the bid matters less than the flashing, housewrap, and window-integration details underneath — and those are exactly the lines that disappear from the cheapest quote.

Typically included

  • Removal and disposal of existing siding where specified
  • Inspection of sheathing and repair at a stated unit price
  • Housewrap or integrated weather barrier, taped and detailed
  • Flashing at windows, doors, roofs, and penetrations
  • New siding in the specified product, with trim and corners
  • Site protection and daily cleanup

Usually excluded

  • Rotted sheathing or framing repair beyond a stated allowance
  • Window replacement, even where the work exposes window problems
  • Painting, when the product is unfinished
  • Gutter removal and reinstallation, unless listed

What a complete Scarborough estimate spells out

  • Whether existing siding is stripped or covered — and if covered, why that is acceptable
  • Weather-barrier product by name and how openings are flashed
  • A per-sheet or per-square-foot unit price for sheathing repair
  • Siding manufacturer, product line, and warranty type
  • How the work integrates with existing windows and trim

Full checklist: what should be in a contractor's estimate.

Looking for a siding replacement contractor in Scarborough?

We don't keep a contractor directory, and we won't pretend to. The dependable process is to gather two or three referrals locally, check the Maine registration or license rules above, confirm general liability and workers' compensation directly with each carrier, then compare the written proposals side by side against the ranges on this page.

Run a Scarborough contractor's business? You can publish a free Our Haus profile with your license, insurance dates, service area, and work photos, and share it by link or QR code.

Have a Scarborough quote in hand?

Run it through the quote range checker. We compare it against the Maine cost index, flag line items that look high, and review the contract against Maine home-improvement rules.

Check my quote

Siding replacement in Scarborough — common questions

Can new siding go over the old siding?

Sometimes — over one sound layer of flat siding, with the right preparation, it is legal and can be reasonable. Over multiple layers, over rot, or where window flanges need re-flashing, strip it. Any honest answer requires looking at what is on the house now.

How long does new siding last in this climate?

Quality vinyl and fiber cement are routinely rated for decades, and both handle freeze-thaw well when the weather barrier underneath is detailed correctly. Cedar performs beautifully but wants a maintenance cycle. The failure mode in New England is almost never the product — it is the flashing.

Keep reading